Clean the mixer

(1) Keep work area should be cleaned thoroughly after each use Clear stir Mixed leaves and stir the pot, outside the residual mortar, and sweeping machines scattered and splash Mortar and dirt on the matter, wipe dry after, put on guard, to prevent dust.
(2) The machine has no external filling hole. Concrete batching plant, gear paid and Bearings and other moving parts on a quarterly basis plus molybdenum disulfide grease once, when refueling Open each bearing cap, bearing between the guide rails and columns, lifting bodies Should always drip oil lubrication, maintenance once a year, all the machine cleaning And add oil and grease.
(3) In case of metal crash the machine running noise, you should first check the mixing Leaves a Concrete mixing plants the pot and stir correctly.
(4) use of stirring the pot, you should gently, not free collision to Free deformation caused by stirring the pot.
(5) When replacing a new pot or mixing blades should be adjusted according to the aforementioned method Whole gap.
(6) should always check the electrical insulation at 20 ℃ ± 5 ℃ Relative Humidity Degree of 50% to 70% of the cold insulation resistance ≥ 5MΩ