concrete mixing station cylinder

The function of the cylinder pressure of the compressed air can be converted to mechanical energy.Concrete mixing plants circumstances, the cylinder should vary with the power-off solenoid valve Switch in place quickly; repeated because the cylinder piston movement, then on the cylinder wall and the piston lubrication is very important. Generally through mist Device, the lubricant injected into the atomizing air stream, and with the air into the lubricating parts, to achieve the purpose of lubrication. Work process Appears close to the cylinder lubricating oil mist effect, away from the cylinder lubrication lubricator poor results. This situation in the aggregate positions Performance is particularly evident on the cylinder. The solution is: In the middle of ready mix concrete plant bin gas added a lubricator. Can be applied to the piston rod A layer of butter to prevent corrosion. Cylinder prone to failure is leak, leak there leakage and leakage are two cylinder piston internal leakage is Components badly worn, causing the piston before channeling gas, affect the speed of movement of the cylinder, causing severe switch is not in place; outside Drain means in contact with the cylinder rod end of the seal and leak badly worn, resulting in slow response rod, even replies Not in place.